IC70SB7-111 with Four Serial Ports(1xOptional), Dual Giga LAN,Six USB ports.
  • Socket G1 (PGA988) Intel® i7/i5 processor with 1066/800 MHz FSB

  • Intel® 5 series Chipset (HM55)

  • Aluminum Profile With Fin, Ultra compact size with Rugged Design

  • Flexible storage devices, One 2.5-inch SATA HDD
  • 1 x VGA and 1 x HDMI (Optional) support 2 independent displays
  • Multiple I/Os,Four Serial Ports(1xOptional), and Six USB Ports
  • System Specification

    Form FactorMini ITX
    Processor SocketSocket G1 (PGA988)
    ProcessorIntel® i7/i5 processor with 1066/800 MHz FSB(Arrandale Core)
    System ChipsetIntel® 5 series Chipset (HM55)
    System Memory2 x SODIMM, Max 8GB DDR3 1066/800 MHz
    Graphic InterfaceIntegrated in Intel GM45, LVDS/CRT
    Ethernet ControllerDual Broadcom BCM57780 PCIe GbE LAN controller
    Serial2 x RS232(1xOptional), 1 x RS232/422/485* ports
    USB6 x USB ports, USB 2.0 compliant
    Watchdog Timer256 levels
    Key Features2xGbE, 3xCOM, 6xUSB

    I/O Connectors

    Front Side I/O
  • 2 x USB Type-A Receptacle

  • 1 x Power/HDD LED

  • 1 x Power Reset Button

  • 1 x Power on Button
  • Back Side I/O
  • 2 x RJ-45(10/100/1000 Mbps)

  • 2 x PS/2

  • 1 x VGA 25P DSUB (male)

  • 1 x HDMI (Optional)

  • 3 x RS232)(1xOptional)1x RS232/422/485

  • 4 x USB Type-A Receptacle

  • Internal I/O pin-header
  • 1 x RS-232 (COM2)

  • 2 x RS-232 (COM5, COM6) by one 900 2x10-pin pin-header

  • 4 x USB

  • 1 x HDMI connector (Erect Type)

  • 1 x DVI by FPC connector

  • 1 x LDVS

  • 2 x SATA II
  • Power input12V DC in

    Mechanical and Environment

    Dimensions (L x W)264mm x 192mm x 57 mm
    ConstructionAluminum housing / Metal
    Power Input+12V DC IN (Lockable, Power Jack)
    Power source rangeTypical 80 W power consumption
    Net Weight (kg) (without touch)1.4
    Gross Weight (kg) (single packing)0.0

    Graphic Specification

    Graphic ControllerIntegrated Gfx Gen5.75
    Max. of Computer MonitorsAnalog monitor resolution up to 2048 x 1536 @75Hz
    • Note: All Specifications are subject to change without prior notice!
      *If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.