R10L210-MRM2
R10L210-MRM2
10.4" Marine Bridge System Display 
Features
  • Dimming knob control backlight brightness from nearly 0% to 100%

  • Transflective film technology enhance visibility

  • Panel (flush) mount IP66 aluminum housing with powder coating design (IP54 rear)

  • 24V DC power input acceptable

  • High quality touchscreen / AR protection glass for option

  • PIP(picture in picture) function and multi-video inputs

  • Ease of use front panel OSD control

  • Enhanced shock and vibration resistance
  • TFT Characteristics
    Panel_Size10.4"
    Panel_Display Resolution800 x 600
    Pixel Pitch (RGB)0.264 (H) x 0.264 (V)
    Panel_Contrast Ratio500:1 (typ.)
    Panel_Brightness400 (typ.)
    Panel_Viewing Angle-80~80 (H); -60~80 (V)
    Active Display Area211.2 (H) x 158.4 (V)
    Max Colors16.2M (8bits/ color)
    Input Signals
    RGB SignalD-SUB 15P connector(female)
    Composite VideoRCA phono plug
    S-Video SignalS-Video (SVHS) plug
    DVI-D SignalDVI-D input 24-pin connector
    DC Power SignalScrew terminal block
    AC Power Signal (Optional)Std. IEC inlet
    Touch Screen D-SUB 9P connector (female)
    Remote control via RS-232D-SUB 9P connector (female)
    User Controls
    Power ControlPower On/Off via Front Button
    VR ControlVR Brightness Knob Control
    Display ControlOn Screen Display control(OSD)
    OSD Remote ControlOSD Remote Control via RS-232
    LED indicatorsPower Mode Status LED
    Power Considerations
    Power Supply Options24 V DC power supply with terminal block.(Isolated Power module)
    Power Consumption21 W typical, normal operation
    Mechanical Specification
    Net Weight (kg) (with touch)1.3
    Panel_Operating Temp-15 ~ +55°C
    Operating Humidity5% to 95% (non-condensing)
    Anti-Vibration5Hz~500Hz /1Grms /3 Axis
    Anti Shock15G, 11ms duration
    Available Options
    Mechanical OptionsPanel (Flush) mount with IP66 (SAW touch for IP54)
    Touch Screen OptionsSAW, 5 Wire Resistive
    AR Safety Glass Option3mm Anti-reflective protection glass
    VESA Mounting Yes
    Bracket mountYes(Bracket Stand for option)
    TransflectiveYes
    Standards and Certification
    Certification and ApprovalsDNV2.4,IEC60945,IACS-E10,CE,FCC
    • *The weight information is for reference purpose.The actual weight will vary according to then options you choose,for example,the touch/glass option.

    • *Due to Panel material's deviation, different panel supplier will set different specific variance range to optical characteristics. The factors of time used, Lamp current, Ambient temperature will influence the optical measurements