• 17" TFT XGA LCD
  • Intel® Dual Core Atom D2550 1.86GHz Processor
  • 1 x SO-DIMM, Max 4GB DDR3 800/1066
  • Integrated VGA, 24 bit single-channel LVDS, DVI
  • Integrated Dual Broadcom BCM57780 Ethernet
  • 1 x SATA, 4 x COM, 6 x USB 2.0, 8 x GPIO, 1 x Mini PCIe slot
  • For I/O part to be IP65, it's suggested to use LAN/USB/COM only
  • Enclosure: Completely sealed, IP65 (NEMA 4X) grade.
  • Widely used in chemical industry, food industry, medical devices, appliances etc. with good corrosion resistance
  • Stainless Material:
    304SUS 304S304003041.4301
  • LCD Panel Specification
    Active Display Area337.92 (H) x 270.34 (V)
    Pixel Pitch0.264 (H) x 0.264 (V)
    Resolution1280 x 1024
    Contrast Ratio1000:1
    Display Color6-bits + Hi-FRC
    Brightness350 (typ.)
    Viewing Angle-85~85(H); -80~80(V)
    Recommend Resolution1280 x 1024@60HZ,75HZ
    Power InputAC110~240V,Universal, ±10%
    Touch Sensor TypeResistive
    System Specification
    Processor SocketOnboard
    ProcessorIntel® Dual Core Atom D2550 1.86GHz
    ChipsetIntel® NM10
    Memory1 x SODIMM (default 2GB, max. 4GB), DDR3L 1600
    BIOSAMI 16Mbit Flash
    LCD Support24-bit LVDS (Dual channel)
    EthernetDual Broadcom BCM57780 Ethernet
    Serial1 x RS-232,3 x RS-232/422/485(inside)*
    USB6 x USB (4 x USB inside)
    Expansion Slots1 x Mini PCIe (for wireless module) 1 x Mini PCIe (for SATA SSD)
    Storage1 x Mini PCIe SSD (default 32GB)
    OSWindows Embedded 7 Standard
    Power AdapterDC IN 12V
    CoolingFanless cooling concept
    ShockOperating: 15G, 11ms duration
    VibrationOperating: 5 Hz ~ 500 Hz/ 1 Grms/ 3 Axis Packing:: 5 Hz ~ 500 Hz/ 2.16 Grms/ 3 Axis
    Mechanical and Environment
    Dimensions ( L x W )416 x 350 x 61 mm
    Operating Temperature0°C to +45°C
    Operating Humidity10~95%, non-condensing
    MountingOne robust bracket with locing handle (Can adjust from -5°to 90°)
    Power Input12V DC IN (Lockable Power Jack)
    Power Consumption47W (typ.)- max backlight & high CPU load
    • All specifications are subject to change without prior notice!
      *If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.