[ A ] [ B ] [ C ] [ D ] [ E ] [ F ] [ G ] [ H ] [ I ] [ K ] [ L ] [ M ] [ N ] [ O ] [ P ] [ Q ] [ R ] [ S ] [ T ] [ U ] [ V ] [ W ]

Light sensor Industrial Displays
Light sensor detect the change of illumination outsiee, then it send the signal to MCU via I?2C interface. MCU will ask inverter to switch the brightness if the outside illumination was change over the default.MCU will transmit PWM signal to the inverter, amd the inverter will change the brightness of panel.

See also:

Learn More

Linear power supply Power Supply
An AC powered linear power supply usually uses a transformer to convert the voltage from the wall outlet (mains) to a different, usually a lower voltage. If it is used to produce DC, a rectifier is used. A capacitor is used to smooth the pulsating current from the rectifier. Some small periodic deviations from smooth direct current will remain, which is known as ripple. These pulsations occur at a frequency related to the AC power frequency (for example, a multiple of 50 or 60 Hz).
LVDS Industrial Displays
Low-voltage differential signaling, or LVDS, is an electrical signaling system that can run at very high speeds over inexpensive twisted-pair copper cables. It was introduced in 1994, and has since become very popular in computers, where it forms part of very high-speed networks and computer buses.

See also:

Industrial Display

Light-emitting diode(LED) Industrial Displays
A light-emitting diode (LED) is a semiconductor light source. LEDs are used as indicator lamps in many devices, and are increasingly used for lighting. Introduced as a practical electronic component in 1962,[2] early LEDs emitted low-intensity red light, but modern versions are available across the visible, ultraviolet and infrared wavelengths, with very high brightness. The LED is based on the semiconductor diode. When a diode is forward biased (switched on), electrons are able to recombine with holes within the device, releasing energy in the form of photons. This effect is called electroluminescence and the color of the light (corresponding to the energy of the photon) is determined by the energy gap of the semiconductor. An LED is usually small in area (less than 1 mm2), and integrated optical components are used to shape its radiation pattern and assist in reflection.[3] LEDs present many advantages over incandescent light sources including lower energy consumption, longer lifetime, improved robustness, smaller size, faster switching, and greater durability and reliability.

See also:

LED Backlight LCD

LAN General
A local area network (LAN) is a computer network covering a small physical area, like a home, office, or small groups of buildings, such as a school, or an airport. The defining characteristics of LANs, in contrast to wide area networks (WANs), include their usually higher data-transfer rates, smaller geographic area, and lack of a need for leased telecommunication lines. ARCNET, Token Ring and other technologies have been used in the past, but Ethernet over twisted pair cabling, and Wi-Fi are the two most common technologies currently in use.

See also:

Panel PC

[Back to Top]

quick inquiry
No.111-6, Shing-De Rd.,
San-Chung District,
New Taipei City 24158, Taiwan, R.O.C.
Tel : 886-2-8511-0288
Fax : 886-2-8511-0211
More Contacts