[ A ] [ B ] [ C ] [ D ] [ E ] [ F ] [ G ] [ H ] [ I ] [ K ] [ L ] [ M ] [ N ] [ O ] [ P ] [ Q ] [ R ] [ S ] [ T ] [ U ] [ V ] [ W ]

Thermal Verification General
We use well-defined thermal analysis procedures to verify our LCD displays and Panel PC systems to meet the harsh environment applications. Especially in fanless cooling design, we develop heat-sink or heat-pipe solution to conduct the heat and the air flow for the best thermal solution. In fan cooling system, we will analyze the system thermal profiles before we design it to make sure the most efficient heat convection.

See also:

Wide Temperature Range

Touch Integration Industrial Displays
The ability of integration is a kind of technology, too. Our engagement in the touchscreen applications can be traced back to the Age of CRT monitors. Along with the prevalence of TFT LCD and its extensive applications, our knowledge about how to integrate touchscreen to a wide variety of displays and mechanical designs has been able to pile up rapidly. Currently, we provide the widest portfolio of touchscreen solutions, including 4/5 wire resistive, surface wave, infrared and surface capacitive.
Tablet PC Rugged Tablet PC
A Tablet PC is a laptop or slate-shaped mobile computer, equipped with a touchscreen or graphics tablet/screen hybrid to operate the computer with a stylus or digital pen, or a fingertip, instead of a keyboard or mouse. This form factor offers a more mobile way to interact with a computer. Tablet PCs are often used where normal notebooks are impractical or unwieldy, or do not provide the needed functionality.

See also:

Rugged Tablet PC series , Slate computers

Terabyte General
A terabyte (or Tbyte) is a SI-multiple (see prefix tera) of the unit byte for digital information storage and is equal to 1012 (1 trillion short scale) bytes. The unit symbol for the terabyte is TB. The designation terabyte is often used to refer to the tebibyte, its binary prefix analogue. Disk drive sizes are always designated in SI units by manufacturers. However, a possible confusion arises from this definition with the long-standing tradition in some fields of information technology and the computer industry of using binary prefix interpretations for memory sizes. Standards organizations such as International Electrotechnical Commission (IEC), Institute of Electrical and Electronics Engineers (IEEE) and International Organization for Standardization (ISO) recommend to use the alternative term tebibyte to signify the traditional measure of 10244 bytes, or 1024 gibibytes.
TDMA Rugged Tablet PC
Time division multiple access (TDMA) is a channel access method for shared medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots. The users transmit in rapid succession, one after the other, each using his own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity. TDMA is used in the digital 2G cellular systems such as Global System for Mobile Communications (GSM), IS-136, Personal Digital Cellular (PDC) and iDEN, and in the Digital Enhanced Cordless Telecommunications (DECT) standard for portable phones. It is also used extensively in satellite systems, and combat-net radio systems. For usage of Dynamic TDMA packet mode communication, see below. TDMA is a type of Time-division multiplexing, with the special point that instead of having one transmitter connected to one receiver, there are multiple transmitters. In the case of the uplink from a mobile phone to a base station this becomes particularly difficult because the mobile phone can move around and vary the timing advance required to make its transmission match the gap in transmission from its peers.

See also:

Rugged Tablet PC series , GPS , GPRS

Transflective LCD Industrial Displays
A transflective liquid crystal display is a liquid crystal display (LCD) that reflects and transmits light (transflective = transmissive + reflective). Under bright illumination (e.g. when exposed to daylight) the display acts mainly as a reflective display with the contrast being constant with illuminance. Only in dim and dark ambient situations an auxiliary transmissive backlight should be provided. When an illuminance sensor is added for control of the backlight, such a transflective LCD can be read over a wide range of illuminance levels. This is why that technique is often found in automotive instrumentation. In portable electronic devices the transflective mode of operation helps to save battery charge, since in bright environments no backlighting is required.

See also:

Transflective product category  , Sunlight Readable Display Technology

[Back to Top]

quick inquiry
No.111-6, Shing-De Rd.,
San-Chung District,
New Taipei City 24158, Taiwan, R.O.C.
Tel : 886-2-8511-0288
Fax : 886-2-8511-0211
More Contacts