• 19" 1280 x1024 Resolution
  • Intel®7th Generation Core i3/i5/i7 processor (Kabylake)
  • Flexible storage devices, one 2.5-inch HDD and one SSD
  • Multiple I/Os, Two Serial Ports and Four USB 3.0 Ports
  • 12V DC Power input
  • DP Support 4096x2304@60Hz
  • HDMI Support 4096x2304@24Hz
  • LCD Panel Specification

    Size19" TFT
    Resolution1280 x 1024
    Contrast Ratio1000 : 1 (typ.)
    Display Color16.7M
    Brightness400 cd/m²(typ.)
    Viewing Angle-85~85 (H); -80~80 (V)
    Touch Sensor Type5-Wires Resistive (Default)
    AR Glass (Optional)
    (Customized housing required if you have the demand of SAW/IR/IT/SC touch)
    Maximum Colors16.7M (8 bits/colors)

    System Specification

    ProcessorIntel®CoreTM i7-7700T Processor, 2.9 GHz
    Intel®CoreTM i5-7500T Processor, 2.7 GHz
    Intel®CoreTM i3-7100T Processor, 3.4 GHz
    ChipsetIntel® Chipset(H170)
    Memory1 x SODIMM, Max 16GB DDR4 2400 MHz, default 4GB
    AudioRealtek ALC283 HD Audio Codec
    Storage1 x M.2 SSD, Max 256GB
    1 x 2.5” 500GB HDD (default)
    LANIntel® Ethernet Controller I211-AT +
    Intel® Gigabit Ethernet PHY I219-LM

    I/O Connectors

    Serial 1 x RS232/422/485,1 x RS232(default RS232)
    USB Port4 x USB 3.0
    Ethernet2 x RJ45-10/100/1000 Mbps
    HDMI1 x HDMI 1.4
    DP1 x DP 1.2
    AudioMic in, Line out

    Mechanical and Environment

    Operating Temperature0 ˚C to 50˚C
    Operating Humidity10% to 90% (non-condensing)
    MountingVESA Compliant

    Security Support

    Security Support Trusted Platform Module (TPM2.0)


    Power Input12V DC IN (Lockable Power Jack)
    Power Consumption85W (typ.)(max. backlight & high CPU load)


    Expansion Slot 2 x M.2 (1 for WiFi, 1 for SSD ), 1x PCIex16

    Order Options

    Storage2.5" HDD/ M.2 SSD
    MechanicalOpen Frame
    Touch5-Wires Resistive(Default) AR Glass(Optional)
    OSWindows 10 IoT Enterprise

    Standard and Certification

    CertificationCE, FCC, RoHS
    • Note: All Specifications are subject to change without prior notice!
      *If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.