Intel® Pentium® N4200 Apollo Lake
  • Intel® Pentium® N4200 Apollo Lake 1.1 GHz (up to 2.5 GHz)
  • 10.4" 1024 x 768 Resolution Transflective TFT-LCD Panel
  • Plastic front cover and Alu-Mg Alloy rear cover with Protective Rubber
  • Trusted platform module (TPM) V2.0
  • Built-in Wireless / BT / GPS
  • Optional 4G LTE
  • Adjustable kickstand that is convertable to handle (optional)
  • Display Specifications

    Resolution1024 x 768
    Contrast Ratio1000:1 (typ.)
    TouchResistive touch
    Viewing Angle88/88/88/88

    System Specification

    ProcessorIntel® Pentium® N4200 Apollo Lake 1.1 GHz (up to 2.5 GHz)
    ChipsetIntel SOC
    Memory4GB SODIMM DDR3L-1866 (Max 8GB)
    Storage64GB M.2 SSD (Max 512GB)

    Wireless Communication

    WLAN802.11 a/b/g/n/ac
    BTBT 5.0
    GPSu-Blox Neo-M8N, supports GPS (Optional GLONASS, Galileo, BeiDou)

    I/O Connectors

    Audio2 x 1 Watt Speaker
    External I/O2 x USB3.0, 1 x Audio Combo Conn. (Mic in or Line Out), 1 x Micro SD card slot, 1 x Micro SIM card slot, 1 x Power Jack, 1 x RS232/422/485(Thru BIOS Setting ), 1 x RJ-45

    In front Control

    Control Button1 x Power, 1 x Menu, 3 x Function key, 2 x Brightness control key
    LED indicatorPower, Battery, HDD, RF

    Mechanical and Environment

    Dimensions (W x L x H)266 x 220 x 50.5 mm
    Net Weight (kg)2.39kg
    Operating Temperature-20°C to 60°C (AC Mode), -10°C to 50°C ( Battery Mode )
    Storage Temperature-30°C to 70°C
    IP ProofIP54(Optional IP65)
    Operating Humidity10% to 90% (non-condensing)
    Mounting VESA mount, Vehicle mount
    CertificationsFCC, CE
    ShockMIL-STD-810G Method 516.6 Procedure I
    VibrationMIL-STD-810G Method 514.6 Procedure I
    DropMIL-STD-810G Method 516.6, 4ft to concrete

    Power Management

    Power Input19V DC
    Battery11.1V, 5200 mAh Lithium-Ion Battery (6cells)
    Adapter100-240V, 50-60Hz / 19V DC
    Battery Operating Time9 hours

    Product Specification

    OSWindows 10 IoT Enterprise 64bit
    Camera2MP Front Camera, 5MP Rear Camera with autofocus
    Data Capture1D/2D Barcode Reader (Optional)


    SecurityTrusted platform module (TPM) V2.0
    • *The weight information is for reference purpose.The actual weight will vary according to then options you choose,for example,the touch/glass option.

    • *With BatteryMon Test Program under Power Saving Mode.

    • All specifications are subject to change without prior notice!
      *If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.
      **Note: Measured at dimming LCD brightness. Varies depending on the usage conditions, or when an external device is attached.